Planning, strategy and feasibility (ТЭО)
Strategic and infrastructure planning, pre-project studies, feasibility studies, investment, technical and economic analysis.
Services
Full cycle of engineering and consulting services
From pre-project studies and feasibility through detailed design, construction supervision, contractor support and technology integration.
Scope
Deliverable, code basis and lifecycle stage for each service
What the client physically receives, the codes the work is produced under, and where each service sits in the project lifecycle.
| Service | Typical deliverable | Code basis | Lifecycle stage |
|---|---|---|---|
| Planning, strategy and feasibility (ТЭО) |
| ShNK and KMK codes of the Republic of Uzbekistan; requirements of international financing institutions are mapped onto the local documentation structure. | Feasibility study (ТЭО) |
| Engineering surveys |
| ShNK and KMK codes for engineering surveys; laboratory testing to the applicable GOST standards. | Engineering surveys |
| Concept and detailed design |
| ShNK and KMK codes of the Republic of Uzbekistan; international design solutions are adapted to local codes and re-verified by calculation against them. | Detailed design |
| Project and construction management |
| The client's contractual framework; FIDIC forms of contract where the project is internationally financed. | All stages |
| Technical and author's supervision (designer's site supervision under CIS practice) |
| ShNK and KMK codes covering construction organisation and author's supervision. | Author's supervision |
| Engineering and tender support for contractors |
| ShNK and KMK codes of Uzbekistan and the norms of Kazakhstan; the established procedure for state expert review of design documentation. | Detailed design |
| Environmental and social studies |
| Environmental legislation of the Republic of Uzbekistan and the procedure for state environmental expert review (государственная экологическая экспертиза). | Feasibility study (ТЭО) · Detailed design |
| Design of automation and dispatch control systems |
| Detailed design | |
| Uzbekistan market entry and local representation support |
| Procurement rules and permitting procedures of the Republic of Uzbekistan. | Investment offer · Feasibility study (ТЭО) |
Engineering surveys
Topographic, geological, geotechnical, hydrological and other investigations for project preparation and delivery.
Concept and detailed design
Concept solutions, preliminary and detailed design, working documentation and adaptation to local codes.
Project and construction management
Schedule, cost, quality, risk and contract management with coordination of all project participants.
Technical and author's supervision (designer's site supervision under CIS practice)
Verification that works comply with the design, applicable standards, quality requirements and approved technical solutions.
Engineering and tender support for contractors
Adaptation of design solutions to the norms of Uzbekistan and Kazakhstan, preparation of working documentation, approvals and support for the contractor in tender participation.
Environmental and social studies
Environmental and social studies and the environmental sections of design documentation.
Design of automation and dispatch control systems
The design part of automation, dispatch control and monitoring systems within the design documentation.
Uzbekistan market entry and local representation support
Market research, tender and project development, compliance support, customer coordination and engineering integration.
Full catalogue
What each discipline covers
The service taxonomy as stated in the company's corporate profile.
01
Highway design
- Highway network development
- Cost-benefit analysis and detailed design of highways and roads of all categories
- Bridges, viaducts, traffic interchanges, underground crossings and footbridges
- Road-construction industrial facilities (asphalt and cement plants) and quarries
- Engineering surveys: geodesy, geology, hydrology, environmental analysis
- Road and landscape design
- Engineering design and calculation of road and bridge structures
- Road passport systems
- Consulting on road construction and the maintenance of road structures
02
Engineering survey and highway design
- Reinforced-concrete and steel bridges
- Suspension bridges
- Rural roads
- Highways, urban and local roads
- Geometric design of local roads and streets
- Pavement design calculation
- Galleries and protective structures
- Access roads to airports and to industrial and commercial hubs
- Cadastre of engineering structures
- Investigation and engineering support for hazardous geological processes, including landslides and ice-slides
- Contract management and construction supervision
03
Railway design
- Railway network development
- Track and crossing design
- Junctions, stations, approaches and link roads to deposits, enterprises and ports
- Electrification, power supply, communications and data lines
- Engineering analysis of transport structures
- Galleries and protective structures
- Automatic fire-extinguishing systems
- Signalling and security systems
04
Water
- Water resources management and river basin planning
- Water supply and wastewater: networks, conveyance mains, storages and related infrastructure
- Potable water and wastewater treatment plants
- Pumping stations and water lifting technology
- Irrigation and drainage: main, secondary and tertiary systems
- Hydrogeology, surface and groundwater investigation, aquifer and supply studies
- Planning and design of reservoirs and watersheds
- Water quality monitoring and modelling
- Water and hydropower development
05
Environment
- Environmental protection and impact assessment (ОВОС)
- Environmental and socioeconomic studies
- Contaminated site, groundwater and sediment remediation
- Hydrological, soil and agronomical analysis
- Wetland delineation and mitigation
06
Buildings
- Design of industrial facilities
- Design of leisure facilities: hotels, restaurants, entertainment centres
- Design of sport and fitness complexes: stadiums, swimming pools, courts
- Design of road transport enterprises of any capacity and purpose
- Design of roadside structures: rest areas, motels
- Design of underground, single-storey and multi-storey car parks
- Design of engineering services: water supply and sewerage; heating and ventilation; electricity supply; gas supply; alarm systems; telecommunications
07
Petroleum products and fuel infrastructure
- Design of product and tank farms within petrochemical plants
- Design of petroleum product storage terminals — crude oil, petrol, diesel, fuel oil, solvents and individual hydrocarbons — including transhipment and storage facilities
- Design of filling stations: liquid-fuel stations, LPG filling stations, compressed natural gas filling compressor stations
- Design of filling stations standing alone or within a roadside complex with hotel, service station and car wash
08
Road infrastructure
- Design of aggregate production: crushed stone, sand
- Design of asphalt-concrete and concrete mixing production
- Design of parking areas and hardstandings
- Design of roadside facilities: lay-bys, filling stations, CNG filling compressor stations, campsites, motels
- Design of road maintenance workshops
- Design of road infrastructure enterprises
09
Surveys
- Comprehensive engineering surveys: topographic survey, geological investigation, soil studies and field works
- Topographic investigation and survey of structures and sites
- Drainage, soil and geotechnical investigation
- Testing of construction materials
10
Field and technical supervision of construction
- Project management, construction management and supervision
- Quality control for new construction and reconstruction works
- Author's supervision (designer's site supervision under CIS practice) and technical supervision over construction
- Contract management and construction inspection
- Development of estimate documentation (сметная документация)
- Development of norms, specifications and standard plans
Quality Planning Co., Ltd holds the modern instruments, equipment and software required to carry out design and survey work and to provide consultancy services.
Project lifecycle
Five stages, one continuous engineering record
Quality Planning can take a project from the first investment offer through to supervision on site, or join at any single stage. Select a stage to see what it covers.
Investment offer
We establish what the project consists of and whether it is workable before design begins. This sets out the options for meeting the client's requirement, indicative quantities, and the sequence of stages that follow.
Deliverables
- Requirement and project boundary
- Technical options
- Indicative quantities
- Plan of subsequent stages
Feasibility study (ТЭО)
The feasibility study compares options on cost, programme and technical consequence. The analysis is taken to the level at which a client or financing institution can reach an investment decision.
Deliverables
- Comparison of options
- Cost and programme estimate
- Economic and financial analysis
- Justification of the selected option
Engineering surveys
We gather the site data the design depends on: topographic survey, engineering geology and hydrology. Survey results govern the design decisions taken later and provide the basis for subsequent calculation.
Deliverables
- Topographic and geodetic survey
- Engineering geology
- Hydrological data
- Technical survey report
Detailed design
We develop the detailed engineering solution and the working documentation required for construction. Documentation is prepared to the norms of Uzbekistan and Kazakhstan, and foreign design solutions are adapted to local requirements where needed.
Deliverables
- Design documentation
- Working drawings
- Specifications and bills of quantities
- Adaptation to local norms
Author's supervision
During construction we verify that the works follow the design decisions as issued. We respond to the contractor's technical queries and process design changes through the established procedure.
Deliverables
- Verification against the design
- Responses to technical queries
- Processing of design changes
- Supervision records
For international manufacturers
Uzbekistan market entry and local representation support
A structured local service for manufacturers and suppliers entering or expanding in Uzbekistan, delivered on a project-specific basis.
Local market research
Demand analysis, sector programmes, market participants, regulatory environment and procurement practice in Uzbekistan.
Tender and project development
Identification and screening of projects and tenders, technical preparation, local partnering and submission support.
Compliance support
Aligning technical documentation with local codes and preparing materials for approvals and permitting procedures.
Customer coordination
Meetings, presentations and technical discussions, and working-level representation on a specific project basis.
Engineering integration
Adapting equipment and systems to the site, adjacent networks and existing infrastructure, with working solutions.
Legal notice: availability of products and brands, and any form of manufacturer representation, are possible only with written manufacturer authorization and are confirmed separately for each project. Information on this website is for general reference and does not constitute an offer.
Equipment and technology
Concrete and precast production systems, and green technology for water, emissions, waste and minerals — handled as a separate line of business.
Need local engineering support?
Describe the task and we will assemble a team for your project.